
Employee tax codes tell your payroll software how much income tax to deduct, and as an employer your job is to use the right code from the right source, then update it when HMRC tells you to. You do not decide the code yourself, and you should not change it because an employee asks.
Most small employers only think about tax codes when something looks wrong on a payslip, often in a new starter's first month or after a code change lands in the middle of the year. This guide explains what the common codes mean, where each one should come from, and what to do when the code you hold does not look right.
Key takeaways
- Codes come from three places: a P45, the starter checklist, or a notice from HMRC.
- 1257L is the most common code; with W1, M1 or X after it, it is an emergency code.
- BR, D0, D1 and 0T give no Personal Allowance for that job.
- Use a new HMRC code before the employee's next payday.
- If an employee disputes their code, they must take it up with HMRC, not you.
What is a tax code?
A tax code is a short combination of numbers and a letter that HMRC uses to tell an employer how much tax-free pay an employee gets in that job. The numbers usually represent the tax-free allowance divided by ten, so 1257L reflects a £12,570 allowance. The letter tells the software how to treat the pay. GOV.UK's employee tax codes guidance is the employer's reference.
The codes you are most likely to see
| Code | What it means for your payroll | Typical situation |
|---|---|---|
| 1257L | Standard Personal Allowance, tax at basic, higher and additional rates as pay rises | Main job, no other adjustments |
| 1257L W1, M1 or X | Emergency code: tax only on pay in the current period | New starter without full information |
| BR | All pay from this job taxed at the basic rate | Second job, allowance used elsewhere |
| D0 / D1 | All pay taxed at the higher (D0) or additional (D1) rate | Second job for a higher earner |
| 0T | No Personal Allowance, but normal bands apply | Allowance used up, or HMRC lacks information |
| K code (e.g. K475) | An amount is added to taxable pay, not deducted | Benefits or underpaid tax exceed the allowance |
| M / N | Taxed like L, reflecting Marriage Allowance received (M) or given (N) | Married couples or civil partners |
| S or C prefix | Scottish (S) or Welsh (C) rates and bands | Employee lives in Scotland or Wales |
| NT | No tax deducted | Only where HMRC has issued it |
Verdict: a code that looks odd is not necessarily wrong. A BR or K code is often correct for that employee. Your rule is simple: use the latest code from a valid source. HMRC lists every letter on its letters page.
Where each code should come from
- New starter with a P45: use the code on the P45, following HMRC's guidance on working out a new employee's tax code.
- New starter without a P45: ask them to complete the starter checklist. Their answer to the employee statement tells you which code to use. Our guide to the P45, P60 and starter checklist covers this in detail.
- Code change during the year: HMRC emails you, and the notice (sometimes called a P6) is in PAYE Online or your payroll software.
- New tax year: codes often need updating from 6 April. HMRC's guidance on the new tax year explains which to carry forward.
What to do when a code notice arrives
- Open the notice in PAYE Online or your software and check it is for the right employee and payroll ID.
- Note whether it includes previous pay and tax figures, and enter them if it does.
- Update the employee's record before their next payday.
- Run the payroll and check the tax on the payslip looks sensible against the new code.
- Keep the notice with your payroll records.
Worked example: an emergency code that corrects itself
Illustrative example. Corner Bakery Ltd is an invented company that runs a monthly payroll. A new employee, Tom, also invented, starts on 1 November 2026 without a P45. All figures are made up.
Tom completes the starter checklist and ticks the statement saying he had another job earlier this tax year. Following HMRC's guidance for that answer, the payroll sets him up on 1257L M1. In November, his tax is worked out on November pay alone. He has already earned £14,000 in his previous job since 6 April, so his allowance for the year has been partly used, and he may end up owing a little under the emergency code.
When the bakery sends its first payroll submission, HMRC matches Tom's records and, in December, emails a new code notice. The bakery updates Tom's record before his December pay. From then on, his payroll uses the code HMRC has calculated for his actual position. The bakery did nothing more than follow the checklist and act on the notice promptly, which is all HMRC expects.
When Tom asks the bakery to "just put him on 1257L", the payroll manager explains that only HMRC can change his code and points him to his personal tax account.
Common mistakes
- Changing a code at the employee's request. Only use codes from a P45, the starter checklist or HMRC.
- Missing HMRC emails. Make sure the email address on your PAYE Online account is monitored.
- Applying a new code a month late. The employee pays too much or too little in the meantime.
- Dropping the S or C prefix. Scottish and Welsh codes use different rates or bands.
- Leaving emergency codes in place for months. If no new code arrives, check your payroll submissions reached HMRC.
- Ignoring the K code limit. Payroll software should cap the tax deducted under a K code at half the employee's pay for that period, so check yours does.
Want payroll that handles this for you?
Our payroll service, from £25 a month per employee, picks up HMRC code notices and applies them before payday. See our pricing, read our guide to setting up payroll for your first employee, or contact us.
Frequently Asked Questions
What tax code should I use for a new employee?
Use the code on their P45 if they bring one from their last job. If they do not, ask them to complete HMRC's starter checklist, and their answer to the employee statement decides which code you use. Until you have either, HMRC's guidance on working out a new employee's tax code tells you which emergency code applies.
Can I change an employee's tax code if they ask me to?
No. As an employer you should only use a code that comes from a P45, the starter checklist process or a notice from HMRC. If an employee thinks their code is wrong, they need to contact HMRC, usually through their personal tax account or the HMRC app. Once HMRC agrees, it will send you the new code.
What does W1 or M1 mean on a tax code?
W1 (week 1) and M1 (month 1) mean the code is used on a non-cumulative basis. You work out tax only on what the employee is paid in the current pay period, ignoring earlier pay in the tax year. It is often used with emergency codes. It stops refunds or catch-up tax building up through the year.
What is the difference between BR and 0T?
Both give no tax-free Personal Allowance, but they work differently. BR taxes all of the pay from that job at the basic rate, which is common for a second job. 0T also gives no allowance but applies the normal bands, so higher earnings can be taxed at higher rates. Use whichever code HMRC has issued.
When should I start using a new tax code from HMRC?
As soon as possible and before you next pay the employee. HMRC will email you when a code changes, and you can view the notice in PAYE Online or your payroll software. If the notice arrives too late to use in the current tax year, HMRC's guidance says to use it in the new tax year.
Related reading
How Berber Accounts & Tax helps
We are a London-based, specialist gig-economy and MTD accounting practice working with fixed monthly fees. If you would like this handled for you rather than doing it yourself, we can help.
Schedule a consultation →Written by the Berber Accounts & Tax team, 124 City Road, London EC1V 2NX, United Kingdom.
Last reviewed: 7 November 2026.
This article is general information, not personal tax advice. Speak to a qualified accountant about your own circumstances before acting on it.
